• Follow us
Home > Exhibition > Content

Contact us

JINAN LIN SHUN CNC MECHANICAL EQUIPMENT CO., LTD
You can submit Orders online, provide feedback, or call our telephone directly;
ADD: No.18, Xiaozhangma Industry Zone, Industry North Road Lichen District, Jinan
TEL: +86 0531-88267066
FAX: +86 0531-88267877
WhatsApp: +86 13589042005
Email: michael@cncrouter.cc
How to do the cleaning and maintenance of woodworking engraving machine
Nov 20, 2018

The cleaning and maintenance work of the woodworking engraving machine is a detailed work. Some woodworking engraving machine customers think that the working process itself is very dusty, that is to say, he is using it in dust. If it is cleaned every day, then there should be More trouble, in fact, normal cleaning and maintenance can extend the life cycle of the engraving machine, but also to reduce the occurrence of failure, the following will specifically share the work that the woodworking engraving machine needs to do.


1   Computer aspect


Check the virus regularly, but be careful not to open the anti-virus level when working, and be careful to interfere. Computer anomalies can also cause many problems, especially for the computer connected to the engraving machine. During the maintenance of the wood engraving machine, we found that the computer abnormality also caused us a lot of unnecessary troubles and also delayed the customer's business.


image


2   Clean up


Clean the industrial control box regularly, dust is the biggest killer of the circuit board. Regularly clean the lead screw to prevent foreign objects from sticking on the lead screw. The lead screw is very important in the equipment. It determines the accuracy of the machine and the screw also plays an important role in the transmission process. After the work is finished, the table should be cleaned in time, which will provide convenience for the next work of the woodworking engraving machine. Clean the material scraps along the rails and guide rails to prevent the machine from appearing during the work due to debris interference.


The continuous operation time of the woodworking engraving machine is less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the water pump. The water-cooled spindle motor must not be dehydrated. The woodworking engraving machine regularly cleans the dust inside the electrical box according to the usage. Check the wiring. If the terminal screws are loose, replace the cooling water regularly to prevent the water temperature from being too high, and the circulating water should be as much as possible. You can change the large capacity water tank.


3   Oiling


After the oil is added, move slowly back and forth to ensure that the lubricant can be evenly applied to the guide rail and the lead screw. If the machine is not used for a long time, it should be refueled regularly to ensure the flexibility of the transmission system. First clean the rails and lead screws, and use a cloth (without hair removal) to clean off the oil and material scraps on the rails and lead screws. Due to the low temperature, both the guide rail and the lead screw can be oiled, and it is best to add antifreeze oil. The refueling cycle is twice a month, that is, every two weeks.


4   Temperature


When the machine is not in use, it is best to pour out the water in the water tank if the room temperature is low to prevent freezing of the water tank and the water pipe. To ensure the ambient temperature of the operation room, the woodworking engraving machine should preferably reach room temperature, at least the staff will not be very cold. Check the applicable temperature of the fueling standard, at least the minimum temperature. The temperature does not affect the woodworking engraving machine very much, but because the user does not add butter to the screw, the winter also forgets to clean up, which leads to the opening of each boot, some studios have very low temperatures, although with the addition of oil, it is still Frozen on.


5   Cooling water


It is possible to use antifreeze to cool. Pay attention to the ambient temperature. Be careful to freeze the water tank and water pipe due to the water temperature being too cold. Cooling water is a necessary condition for the normal operation of the spindle motor. If the cooling water is dirty, it will cause serious damage to the motor, ensure the cleaning of the cooling water and the normal operation of the pump. Pay attention to the water level, and the water-cooled spindle motor must not be dehydrated, so that the motor heat cannot be exported in time.

image

In summary, the above inspection and cleaning of several aspects of woodworking engraving machine is very necessary and effective, which is conducive to the maintenance and maintenance of woodworking engraving machine, and is also conducive to timely detection of problem failures and timely solution.