• Follow us
Home > News > Content

Contact us

JINAN LIN SHUN CNC MECHANICAL EQUIPMENT CO., LTD
You can submit Orders online, provide feedback, or call our telephone directly;
ADD: No.18, Xiaozhangma Industry Zone, Industry North Road Lichen District, Jinan
TEL: +86 0531-88267066
FAX: +86 0531-88267877
WhatsApp: +86 13589042005
Email: michael@cncrouter.cc
How To Do The Maintenance Of Laser Machine In Winter
Sep 30, 2017

How to do the maintenance of laser machine in winter

Winter comes, the weather temperature also reduced a lot, here to remind the new and old laser machine customers, in winter how to do equipment antifreeze measures.

Carbon Dioxide Laser Machine series

1, carbon dioxide laser tube is water-cooled, we'd better control the temperature at 25 degrees, because at this temperature when the energy is strongest. In fact, winter antifreeze and summer heat protection is very important.

2, during the winter freeze, in the case of not using equipment, if the water in the laser tube is not put clean, will cause the cooling layer of the laser tube icing swelling, crack laser cooling layer. Causes the laser tube to not function properly. In winter, the cooling layer of the laser tube is not within the range of the shifting. In order to avoid unnecessary losses, please follow our advice.

3, how to do a good job antifreeze measures:

Please turn off all equipment power.

▲ first with air pump or compressor (small size less than 0.3MP) and other ancillary equipment to the laser tube thoroughly clean water.

▲ the water in the laser machine is completely clean.

▲ the customers who use chillers or pumps can be removed from the chiller or water pump and placed in a high temperature chamber to prevent the ice from circulating equipment, causing the damage to the parts of the chiller's pump to bring you unnecessary trouble, or putting the water in the chiller or water pump thoroughly clean.

▲ There is also a point to note is that do not add antifreeze in the laser tube, antifreeze will affect the quality of light, heat dissipation, heat dissipation, power and service life may be affected.

▲ The machine can be placed in a constant temperature environment if conditions are available.

▲ again use, after adding water please do not immediately open the laser work, waiting for the water cycle to 20 degrees and then open the laser work to prevent excessive temperature difference caused by laser tube burst, causing you unnecessary loss.

▲ as far as possible not to use equipment or when the cold water machine running, there are many security risks.

▲ after the completion of water must check whether the components still have residual water, the residual water will also cause damage to the relevant parts, as far as possible completely clean, to avoid unnecessary loss.

Fiber Cutting Machine Series

When the environment reaches the freezing point and the equipment is not used, how to do the freezing prevention measures:

Please turn off all equipment power.

▲ first with air pump or compressor (small size less than 0.3MP) and other ancillary equipment to the laser thoroughly clean water.

▲ Use the pump or air compressor (small size less than 0.3MP) and other ancillary equipment will be the laser head and water pipes thoroughly clean.

▲ the water in the laser machine is completely clean.

▲ using cold water machine customers, the chiller can be removed and placed in a high temperature indoor, to prevent water circulation equipment icing, resulting in the cold water pump parts damaged to bring you no need to trouble, or the water chiller inside thoroughly clean, including the water cooler filter in a completely clean.

▲ The machine can be placed in a constant temperature environment if conditions are available.

▲ use again, after adding pure water, please do not immediately open the laser work, waiting for the water circulating temperature to 20 degrees Celsius and then open the laser work.

▲ as far as possible not to use the equipment or always open the chiller operation, there are many security risks.

▲ after the completion of water must check whether the components still have residual water, the residual water will also cause damage to the relevant parts, as far as possible completely clean, to avoid unnecessary loss.

Anti-freezing case of fiber laser

I. Basic principles and methods of antifreeze

Liquids have "freezing point", when the liquid temperature is below this "freezing point" temperature will solidify to form a solid, and in the process of liquid solidification volume is larger, this will "support the bad" water-cooled system piping and sealing connections caused damage. In order to avoid cooling liquid solidification caused by laser, output head, water cooler damage, there are 3 solutions:

1. If there is absolutely no power failure, the water cooler at night, at the same time for energy-saving, low-temperature and temperature adjustment to 5 ~ 10 ℃, to ensure that the coolant is in circulation and temperature is not less than freezing point.

2. Every day after the use of laser, laser output head, water-cooled cooling liquid emptying.

3. Use antifreeze as coolant.